2W8002 E3304 E3306 Excavator Engine Spare Parts Water Pump

Product Description

Product advantages

1. The water pump impeller adopts the raw material Seiko pure aluminum leaf
2. Using imported high-quality bearings
3. Use high quality seals to ensure no water leakage
4. Original 1:1 mold opening design and manufacture, no deviation in size, accurate hole position
5. The water pump shaft adopts VG drill steel, pure fluorine rubber oil seal
6. Using high-strength materials, corrosion resistance, wear resistance, and long service life
7. 100% inspection of each product before shipment, stable quality and superior performance

How the product works

In the upper water outlet of the engine, there is a water pump, which passes through the belt
to drive, pump out the hot water in the water channel of the engine block, and pump the cold water
enter.
The water pump bearing and impeller are driven to rotate by the pulley, and the
The coolant is driven by the impeller to rotate together, and is thrown away under the action of centrifugal force
to the edge of the pump casing, while generating a certain pressure, and then from the outlet
Outflow from water channel or water pipe. At the center of the impeller, the coolant is thrown out
The pressure is reduced, and the coolant in the water tank is between the pump inlet and the center of the impeller.
Under the action of pressure difference, it is sucked into the impeller through the water pipe to realize the reciproion of the coolant
cycle.

Water pump failure performance

1. Unstable idle speed:
The failure of the water pump can cause the rotational resistance of the water pump to increase.

2. There will be noise in the engine part:
This sound is a rolling friive, similar to the sound of "boom boom boom".
This sound can be accelerated as the engine rotates and changes in volume
change. This noise generally increases with the severity of the fault
increasingly obvious.

3. Cooling system failure
1) Hot air is not hot
The most overlooked phenomenon caused by lack of flow. Engine water in winter
After warming up,
The hot wind cannot blow out, and inexperienced people even think that
The car is dead, it's time for a replacement. In fact, just replace a small water pump.
All can solve the problem.

2) Engine water temperature is unstable:
The performance is that the engine water temperature indior needle fluctuates within a certain range. The reason is
The water temperature in the small cycle is inconsistent due to the lack of circulation. On the one hand, it leads to
The opening temperature of the thermostat increases, on the other hand, after the high temperature water flows out, the low temperature
The water quickly flows to the thermostat, causing the thermostat to close quickly. Under normal conditions
After warming up, the water temperature of the engine will remain at a relatively constant
level, approximately at 93°C.

The five-star service we give you

1. We have advanced technoledge and 100% testing before delivery.

2. Quick delivery and competitive price.

3. The larger quantity you order, the better price and faster delivery we can supply.
4. We have a professional team to offer professional service for you.
5. We can offer used and new, oem, good quality, made in china parts to you.
6. The parts will give weight, price when quotation.

2W8002 Part Number Product alog

More related products you are looking for

5S1601 PUMP GP-SCAVENGE OIL
D4E, D4E SR

9J5055 PUMP GP-VANE
930

9J5082 PUMP GP-VANE
140, 141, 153, D4E, D4E SR

3T4604 PUMP GP-GEAR
930R

4T0509 PUMP GP-VANE
966C, 966R

1335100 PUMP GP-TRANSMISSION
966F, 966F II, R1300, R1300G

6E2064 PUMP GP-VANE
966D, 966F

4T0508 PUMP GP-VANE
930R

3G9891 PUMP GP-GEAR
814B, 936, 936F, 950B, 950B/950E, 950F, 950F II, 960F, 966D, 966F, 966F II, 970F, G936, R1300, R1300G, R1300G II

3G7635 PUMP GP-VANE
528, 528B, 530B

1214512 PUMP GP-VANE
970F, R1600, R1600G, R1600H

0R1000 PUMP GP-WATER
615C, 966F, 966F II, 972G

4W2549 PUMP GP-FUEL INJECTION
16G, 245, 245B, 3406B, 621E, 623E, 627E, 824C, 825C, 826C, 980C, D40D, D8N, RR-250, SS-250

8N0971 PUMP GP-GOV & FUEL INJ
980C

1276449 PUMP GP-FUEL PRM & WATER SEP
3114, 3116, 45, 527, 55, 554, 574, 928G, 938F, 938G, 950F, 950F II, 950G, 960F, 962G, BG-225C, CB-634, CB-634C, CB-634D, CS-531C, CS-533C, CS-563C, CS-563D, CS-573C, CS-583C, CS-583D, D3G, D4G, D5G, D...

1448267 PUMP GP-SCAVENGE
3512, 3512B, 3512C, 3516, 3516B, 3516C, 5230, 5230B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793B, 793C, 793D, 797, 797B, 994, 994D, 994F, 994H, SPF343, SPF343C, SPS343, SPT343...

9N3288 PUMP GP-WATER
16G, 16H NA, 245, 245B, 245D, 3406, 3406B, 3406C, 375, 375 L, 5080, 578, 583R, 621, 621B, 621E, 621F, 623B, 623E, 623F, 627B, 627E, 627F, 814B, 824C, 824G, 825C, 825G, 826C, 826G, 980C, 980F, 980F II,...

4W0469 PUMP GP-FUEL INJECTION
215, 215B, 3204, 508, 916, 926, 926A, 953, D3B, D3C, D4H, D4HTSK II, D5C, E180, G916, G926, IT18, IT18B, IT28, IT28B

1715813 PUMP GP-PISTON
318B

8N8749 PUMP GP-GOV DRV,FUEL INJ & TFR
3408

7N1185 PUMP GP-FUEL INJECTION
3408, 3412, 988B, D8L, D9L

6N1043 PUMP GP-FUEL INJECTION
245, 3406, 3408, 3412, 621B, 631D, 633D, 637D, 639D, 768C, 769C, 772B, 773B, 988B, 992C

1220595 PUMP GP-PISTON
CP-433C

2476050 PUMP GP-FUEL PRIMING
586C, 621H, 621K, 623H, 623K LRC, 627H, 627K LRC, 730C, 735B, 740B, 770G, 772G, 773G, 773G LRC, 773G OEM, 775G, 775G LRC, 775G OEM, 777G, 824K, 825K, 826K, 834H, 834K, 836H, 844H, 844K, 854K, 986H, 98...

FAQ

Q1. Which shipment can you supply?

A1: By sea, by air or by express(DHL, Fedex, TNT, EMS, UPS, etc).

Q2. What is your terms of packing?

A2: Generally, we pack our goods in neutral cartons or wooden boxes. If you have legally registered patent, we can pack the goods in your branded boxes after getting

your authorization letters.

Q3. What payments are available?

A3: T/T , Western Union, Trade assurance, L/C.

Q4. What is your terms of delivery?

A4: EXW, FOB, CFR, CIF.

Q5. How about your delivery time?

A5: Generally, it will take 1 to 3 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order.

Q6. What is your sample policy?

A6: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample fee and the courier cost.

Q7. Do you test all your goods before delivery?

A7: Yes, we have 100% test before delivery.

Q8: How do you make our business long-term and good relationship?

A8:1. We keep good quality and competitive price to ensure our customers benefit .

2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Q9: How can i trace my order?

A9: We'll send you the Bill of Lading or express tracking number once it comes out.

Guangzhou HLMC Machinery Trading Co., Ltd. is specialized in export of construction machine spare parts.loed in Guangzhou Huangpu international constauction machine market(the biggest market in Asia).Our products become more various(including:hydraulic parts, engine parts, eletronic parts, oil seal ) .We cooperate with many professional China Manufacturers, and work together more than 5 years. All spare parts for excavator with various brands we can supply for you! We spread our products to every corner of Africa, Southeast Asia, the Middle East, Europe and America, and provide professional information and service. We warmly welcome clients from all over the world to contact us for any enquiry, and we will try our best to provide professional service to satisfy you. Good communiion, completely information of products, standard quality, great price and sincere attitude. Hope we can be your trusted partner!!!

Our Factory

Our Office

Our Meeting Room

Our Showroom

Our Warehouse